Click on the image to check the artwork
By certification 
high speed automatic die cut machine 1080
Main Specification
Model |
XLMY-1080 |
Max. Paper Size(mm) |
1080×780mm |
Min. Paper Size(mm) |
400×370mm |
Max. Die-cutting Size: (mm) |
1070×770mm |
Die-cutting Precision |
±0.1mm |
Max. Working Speed |
7000s/h |
Sheet Thickness |
1mm≤Corrugated≤4mm |
| 0.2mm≤Paperboard≤1.5mm | |
Max Pressure |
300T |
Total Weight |
15.8T |
Total Power |
17KW |
Overall Dimensions(mm) |
5000*4000*2150mm（not include pre-loading part） |
The Model machine can adopt foil stamping or stripping station structure.
1, XLMY-1080 Automatic die-cutting &creasing machine is a key equipment to die-cutting, creasing, and cold embossing paper cassette, box and label etc.
2, High precision indexing mechanism, pneumatic-lock plate, air clutch, unique drive gear, locating system and high speed and even feeding ensure smooth feeding, accurate location, even delivery.
3, The bearings and chains of main drive are imported ones.
4, The key parts, control system and fastener are all imported. This machine is of stable pressure, accurate location, high precision, safety and reliability in operation.
5, Electricity unit adopts computer control human-machine interface, electricity&light detection and light&sound alarm, which make operation safe, this ensures fully automatic. Interface shows working state and trouble elimination.
6. Programmable controller is incorporated to realize fully automatic feeding, die-cutting, delivery, malfunction display and diagnose etc.
7. The main motor is controlled by frequency converter, which can do stepless speed change.
Die-cut master experience sharing: solving the magic weapons of die-cutting
Due to the long time and wear of the die-cutting machine, the chain of the tooth row is loose and elongated. During the die-cutting process, when the chain drags the tooth row outward, the chain cannot be straightened, and the paper with the sponge strip is pressed. The paper on the die-cutting plate is easily torn and eventually causes a loose plate.
Over-packaging in the die-cutting process of the carton, often encounters the problem of disperse, that is, the carton and the waste side are scattered and the paper-cutting process is not smooth, which is a problem that the operator is very troublesome. Some solutions have been summarized in actual production for your reference.
Clear obstacles
The reason for the loose plate may be that there are small and hard-to-detect foreign objects on the paper path, especially when the newly-applied indentation mold has obstacles. In this case, special attention should be paid to check whether the indentation mold slot is smooth. With or without sharp corners and barbs, these small problems can affect the normal travel of the paper. The operator can use a sharp blade to flatten the edges of the indentation mold or sand it with sandpaper and apply scotch tape along the edges.
Increase the connection point
When designing the carton, the designer will set the connection point at the position of the corresponding carton, but usually, in order not to affect the appearance of the carton and facilitate the stripping (hand peeling), the connection point is designed less and also Smaller, if you encounter a problem with the plate during die cutting, the operator can add a connection point at the mouth of the carton and the dust-proof slap.
Choose the right sponge strip
If the sponge strip filled between the die cutters is too soft and cannot be bounced smoothly, it will also cause a loose copy. A sponge strip with moderate hardness should be selected.
http://www.cartons-pack.com/
