Click on the image to check the artwork
By certification 
SFP GE SX compatible SFP transceiver supports up to 550m link lengths over multi-mode fiber (MMF) using a wavelength of 850nm via an LC connector. Each SFP transceiver module is individually tested to be used on a series of Juniper switches, routers, servers, network interface card (NICs) etc.
Featuring low power consumption, the hot swappable 1G SFP transceiver is ideal for Internet Service Provider (ISP) Gigabit Ethernet communication links, Enterprise LAN & SAN Networks, Data Center LAN & SAN Networks and other optical links.
Item Spotlights
● Operating Data Rate up to 1.25Gbps
● Up to 550m
● Single 3.3V Power Supply and LVTTL Logic Interface
● Hot-Pluggable SFP Footprint Duplex LC Connector
● Interface Class 1 FDA and IEC60825-1 Laser Safety Compliant
● Operating Case Temperature Standard: 0C~+70C and Industrial: -40C~+85C
● Compliant with SFP MSA Specification
● Compliant with SFF-8472
Description
| Compatible | SFP GE SX |
Vendor Name |
FB-LINK |
Form Factor |
SFP |
Max Data Rate |
1.25Gbps |
Wavelength |
850nm |
Max Cable Distance |
550M |
Connector |
Duplex LC |
Media |
MMF |
Transmitter Type |
VCSEL |
Receiver Type |
PIN |
TX Power |
-9.5~-3dBm |
Receiver Sensitivity |
＜-17dBm |
Bit Error Ratio (BER) |
1000BASE-SX guarantees a link BER of 1E-12 when supporting 550m on MMF |
Receiver Overload |
-3dBm |
Power Consumption |
≤0.8W |
Extinction Ratio |
＞9dB |
DDM/DOM |
Supported |
Commercial Temperature Range |
0 to 70°C (32 to 158°F) |
Protocols |
IEEE 802.3z, SFF-8472, SFP MSA (INF-8074i) Compliant |
Warranty |
3 Years |
Questions & Answers
Q:Good day, it is compatible with the Cisco industrial switch model IE-1000-8P2S-LM?
A:Yes, both of them can be compatible with your device.
Q:I need a module in this link Catalyst 9200L with 1GB uplinks -- Catalyst 2600 with 1GB uplinks, can I use ?
A:Yes, you can, I used this module on my Catalyst switches, it can work.
Q:Is there a distance limitation on the Fiber Optic system cable from Transceiver to Transceiver?
A:The max distance on the Fiber Optic system cable from Transceiver to Transceiver is 550m, we recommend OM2 or OM3 multimode fiber cable.
http://www.100gmodule.com/
