Click on the image to check the artwork
By certification 
tem |
5052 Extruded Aluminum Round Bar |
Material available |
1060,1100,1200,2024,2124,2014,2124,3003,3006,3030,5052, |
Standard |
GB/T3191-1998,ASTM B221M-05A,JIS H4040-2006,etc |
Diameter |
2-250mm |
Length |
2m,3m,5.8m,6m,or as required |
Finish Condition |
O,H14,H12,H16,H18,H22,H112,T5,T6,T651,T351,T42,T451,T62,T3,T81,etc |
Surface |
Mill finish, polished, anodizing, brushing, sand blasting, powder coating, etc. |
Package |
Standard export package ,or as required |
Application |
5052 Aluminum round bars are mainly used for low load parts requiring high plasticity and good weld ability, |
Chemical Composition | |||||||||||
Grade |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Zr |
Al |
5052 |
0.25 |
0.4 |
0.1 |
0.1 |
2.2-2.8 |
0.15-0.35 |
— |
0.1 |
— |
— |
Balance |
Mechanical Properties | ||||
Grade |
Temper |
Diameter(mm) |
Tensile Strength(Mpa) |
Yield strength(Mpa) |
5052 |
O |
≤250 |
170-230 |
≥70 |
H112 |
≥170 |
≥70 |
||
http://www.southwest-aluminum.com/
